To get back to the advancement of Rimfire Accuracy. Strictly Moderated.
The classified ads at the bottom of the forums page are $2.00 each. Please send to: Jessica Pappas 6908 Sandalwood Lane Ft. Worth, Tx. 76116
First, I think Dupont Spinner's idea for a forum dedicated to Newbies questions is a great idea. Probably would eliminate the space I'm about to...
Ok, so I understand the bullet run out concept, but I've a question: Have you ever measured rim run out? I've already noticed varying rim thickness...
Is it a big problem for the accuracy if the bullet don't touch the rifling when is in the chamber? I bought a Remington 40 X three years old and the...
Has any one tried glueing 54 anschutz barrel in action for bench rest. Border barrel and the guy in that sells anschutz glues them. I have one apart...
Hi guys, I have gotten the opportunity to test two buttoned barrels recently and I have come to think. Both barrels are absolutely perfect for my use...
O.K. 1. What is your min. requirement in testing ammo that makes it good, great or bad? 2. In what amounts do you buy it in for testing? 3. How...
I have purchased a couple bricks of Midas + and Center X and would like to know of a supplier that can provide lot information. Thanks Pat
I am building a three position rifle using a Hall action. Because it is a position rifle, not a bench gun, I'll need to attach a fore-end rail, a...
How does everyone calculate “superior” rimfire ignition? Who among you have tested and gathered data, other than anecdotal or observational? If...
Okay, I'm only bringing this up cause I'm totally bored at work and it just popped into my idle mind. Anyone have an opinion as to whether it makes...
Is there a "definitive " how to use or read wind flags article. I have seen a major improvement since I started using them and want to learn more....
Anybody out there shoot benchrest pistols? Whats your thoughts on the grip position ? center grip like the XP 100 or more of a rear grip, assuming...
I have been slugging a couple of 22RF bbls. One is an Anschutz 1913 and the other a Rem 40 XR heavy bbl. The Anschutz (a position rifle) being a...
Why do people have trouble chambering a Shilen octogon barrel? Is it also hard to lapp one? Thanks! Pete
G'day I am after any information in regards to off setting the action in the stock to counter the torque effect of the bullets spin. I am awhare...
James Would you be so kind as to present a primer on the recommended procedure for using a JJ Slide for tuning Thanks in advance for your...
Bill, Does Eley still produce their Slugger slugging bullets? If so, who sells them? Hawkeye Wizard
I’ve been thinking about this for a while, if there is a formula for working out lock times how is it no one has worked out the maths for ignition? ...
Would this work or just a waste of time? For anybody that has a problem understanding the concept it is a Harrel's tuner placed on top of...
kick'n a idea around about as small barrel block on a LV contour barrel about say 1 inch wide and protrude say 1/4 down in the stock for a recoil...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
