Forum: Gunsmithing

I have a Benny action rifle that has a weak firing pin hit Anyone know how to diassemble bolt on one of these If you have ever had one of these, ...

I hope this is of interest to some. Just finished this project. The magazine is a modified Savage MKII. I wanted a 5 shot but one wasn't...

What options are available for a H&R mdl 12 ( Broughton 5C, Hohne tuner)? At present my current trigger (reworked factory) is not as light/reliable...

Installing a new barrel on my CZ 452 varmint 22lr. If I use a cone breech can I use the clip without having a feed issue? JDY

Just thought I would share a method I havn't seen elsewhere for headspacing. I have been accurizing the 45x's for a while like this and also...

I would like to hear if anybody has any experience with any of these CMP 40X complete action, which CMP is out of them now. I've looked at 7 of them...

Slick Thanks, for the phone # I did call Richard, he was very helpful, no drama, smoke & mirrors, no beating around the bush, oh yea we didn't...

Replaced the firing pin spring on my 40X rimfire action, because I was getting light strikes on the rim. Installed a 26 lb. spring from Wolff. After...

Could you folks contribute to a list of factory take-off barrel dimensions? For example, I've an accurate Sako p94 finnfire varmint barrel, and am...

Hi Guys,new to the site:cool:. Based in europe and im interested in getting into rimfire smithing . My question is ,if i was to pick and stick with...

I have used several bedding products throughout the years...some easier to work with than others. In rimfire benchrest, pillar bedding appears to be...

I want to turn my own tuner for a CZ 455 varmint barrel. Stainless steel will be the material. The barrel is .863" diameter with no taper and 20...

Hi guys,is there dvds that can be got on line, on the subject of chambering rimfires ?

What is the best Target Crown for rimfire benchrest barrels? From what I gather, there are two popular designs used by gunsmiths and manufacturers, a...